Skip to main content

Connecting to an Airmedia with a Windows Laptop - Knowledgebase / Teaching Learning and Research / Wireless Projection - OIT Service Center

Connecting to an Airmedia with a Windows Laptop

Authors list
  1. Connect to the Brown wireless or Brown Guest network.
  2. Once you launch the AirMedia application, you will see a login window appear.

When prompted, enter the IP address which is displayed in the bottom-left corner of the projected screen and press CONNECT.

**Each classroom has a unique IP addresses**

After connecting you will be asked to provide a passcode. Located on the bottom right of the projected screen.

**This passcode will change every time a session is ended**

To disconnect from the airmedia, close the Airmedia application.

Helpful Unhelpful

53 of 116 people found this page helpful

Send us a note about this article

Contact the OIT Service Center

Phone: 401-863-4357


Location: Page Robinson Hall - 69 Brown St., Room 510

See our availability

Walk-ins Welcome! Appointments recommended.

For reserved service for a technical consult or a loaner check-out, you can schedule an appointment here.