Skip to main content

Connect to an Airmedia with an Apple IOS device - Knowledgebase / Teaching Learning and Research / Wireless Projection - OIT Service Center

Connect to an Airmedia with an Apple IOS device

Authors list
  1. If you've haven't yet, download the AirMedia app from the App Store
  2. Connect to the Brown wireless network or Brown-Guest Network.
  3. When you launch the AirMedia app for the first time you will need to accept the terms and conditions.
  4. Input the IP address shown on the bottom left corner of the projection screen.
  5. After you enter the IP address, press the “Present with AirMedia” button
     
  6. You will be prompted with a message asking to Connect Using Airplay.  To do so, open the control center and tap Screen Mirroring - from there you can select the corresponding AirMedia location.
  7. You will then be prompted to enter a passcode which is located on the bottom right of the projection screen.

To stop presenting open control center and tap “Stop Mirroring” button.

Connecting to an Airmedia 100 With an Apple IOS Device.

Download the “AirMedia for AM-100” app from the App Store

You will then input the IP address shown on the top left corner of the projection screen. 

After you enter the IP address press the “Present with AirMedia” button 

You will then be prompted to enter a passcode which is located on the top right of the projection screen.

To stop presenting, press the stop presenting button.

1.jpg

 


Helpful Unhelpful

85 of 204 people found this page helpful

Send us a note about this article

Contact the OIT Service Center

Phone: 401-863-4357

Email: help@brown.edu

Location: Page Robinson Hall - 69 Brown St., Room 510

See our availability

https://it.brown.edu/get-help

Walk-ins Welcome! Appointments recommended.

For reserved service for a technical consult or a loaner check-out, you can schedule an appointment here.